Brother Printer error codes

What are the ways of fixing the Brother printer error codes?

There are a number of Brother printer error codes that the users have been facing. If you are the owner of a Brother Printer and use it for both your personal and office use, and we are sure that you must have faced various types of errors such as the unable to Print error, toner replacement error, error with the drum, paper Jam issues, and different other Brother Printer Error Codes. This is nothing unusual for any of the users. It is a usual error that is reported for the Brother Printer as well as every other printer brand in the world.

Below given is a list of the Brother printer errors that are most commonly faced by the Brother users. We have talked about the error codes in this blog post that are discussed and reported about the most. We have also provided you with a quick fixing solutions and correct ways of fixing of the few of them that we have discussed here:

Brother printer error message “Unable to Print 30”

Brother printer error message “Unable to Print 35”

Brother printer error message “Unable to Print 50”

Brother printer error message “Unable to Print 51”

Brother printer error message “Unable to Print 48”

Brother printer error message “TS-02”

Brother printer error message “Replace Toner”

Brother printer error message “No Paper”

Brother printer error message “Drum Error” or “Clean Drum Unit”

Brother printer error message “20”, “21”, “22” or “23”

Brother printer error message “TS-07”

Brother printer error message “Print Unable 36”

Brother printer error code message “45”

Brother printer error code message “0x803c010b”

Brother printer error code message “54”

Brother printer error code message “55” or “Replace Laser Unit”

Brother printer error message “Paper Jam”

Now, we suggest you to continue reading further and you will find the right solutions to fix all the Brotherprintererrorcodes.

1. Brother printer error code

“Error 30” or “Unable to Print 30”

Quick fixing of the error

Error 30 is among the

messages that are reported most commonly. The error code 30 and the error message of “Unable to Print” is a sign that the printer is not able to print as there is a malfunction. One more cause for the presence of this error to take place is the object stuck in your printing machines, such as a paper clip or a paper piece.

If your Brother printer is not able to do its printing and displays the message “Unable to Print 30”, you can fix the problem with the help of this troubleshooting steps: take both hands to lift the cover of your scanner and check that you are able to see the support arm of the scanner cover that is on the left side of the printing machine.

Now check if there are no objects in both the right and the left hand sides like any paper pieces and paper clips, that were jamming the printer. Later, turn the printer and open the cover of the jam to check if there are any foreign objects and then remove the jammed papers. Once you have removed all objects, close the covers and start with printing.

2. Brother printer error code

“Error 35” or “Unable to Print 35”

Quick fixing

Are you looking for a solution to get rid of the Brother error code 51? The error message “Unable to Print 51” is a common Brother printer error message, and it indicates that there is an issue with the laser unit.

If you have changed your Brother printer's cartridge, there is a high chance that you did not put the cartridge, laser, or your lid is not in the correct position. For fixing this issue, you need to open the printer and make sure that installed everything in a correct way.

If you did not change the cartridge and still facing the error code 51, you need to switch the printer off and on again. If the problem still exists, then the reason is because of a defective part in your laser unit. You have to fix this issue by replacing your laser unit.

3. Brother printer error message

“Error 50” or “Unable to Print 50”

Quick fixing

Brother error message 50 takes place because of a malfunctioning unit of the fuser. This can be the reason that the fuser unit has become too hot while you are printing, or there was not enough heating when your printing. As a result, you are not able to print from the Brother printer.

If you want this issue to be troubleshot, then you will have to turn off the printer and wait for a few seconds. Now turn on the printer again and wait for a few other minutes. If error 50 still exists, you need to get the fuser unit of your Brother printer replaced.

4. Brother printer error message

“Error 51” or “Unable to Print 51”

Quick fixing

Are you looking for a way to get rid of the error code 51? The error message “Unable to Print 51” is a usual Brother printer error, and it indicates that there is an issue with the laser unit.

If you have changed the cartridge of your Brother printer recently, there is a high probable chance that either the cartridge, or the laser, or the lid was not put in the proper position. To fix this issue, you need to open the printer again and make sure that everything has been installed properly.

If you did not change the cartridge and you are still facing the error code 51, try to switch the printer off and on again. If the problem exists, a part of the laser unit is defective. You can fix the issue also by replacing the laser unit.

5. Brother printer error message

“Error 48” or “Unable to Print 48”

Quick fixing

Error 48 is among all the error code messages, which is “Unable to Print” that the Brother printer created. The error message denotes that there is a print head cable that is broken or a damaged circuit board. This may be the reason why the foreign objects, such as the rejected pieces of paper clips and even the paper, are stuck in your Brother printer and it is destroying the printer head.

If you want to fix the Brother printer error code 48, you are required to turn off the printer and put the scanner cover up. Now, see any objects if they are stuck in your printing machine. If you can find any objects that should not have been there, you have to get them removed carefully. If this does not help you to get rid of the error code and messages, you will have to clean the encoder strip that is in your brother's printer.

The transparent plastic strip in the vinyl band in your machine is known as the encoder strip. Take a dry cloth, and carefully clean the strip. Then turn on the printer and then a print command is to be passed to make sure if the problem is resolved.